Our aim is to create furniture that lasts and to counteract the throwaway society.
Respectful use of resources and experimentation with natural raw materials go hand in hand for us. The base material for the surfaces is exclusively FSC or PEFC certified birch plywood, solid wood or MDF.
As we have no stock, our products are made to order.
Our natural materials, such as wood veneer and linoleum, are made from natural, renewable resources, so there may be slight variations in colour and grain between batches.
The sample you order may therefore differ from your order.
Please bear this in mind when making repeat orders or complaints.
We offer all the dimensions available from IKEA, plus our own variations, such as 2 cm longer fronts on wall units to hide the light behind.
Shelves, invisible shelves for wall mounting, cabinets with special dimensions and much more.
All fronts have the matching pre-drilled holes and are installed in the same way as IKEA fronts.
Neuvermoebelt fronts are 18 to 20 mm thick, depending on the design and material. The designs cannot therefore be mixed if they are placed side by side in a row, as this would result in an uneven front appearance.
Each front has a 1mm thick rubber sheet attached to it to act as a damper.
With Tip On fronts you need a 3mm gap to the cabinet (18-20mm front thickness +3mm) for the Tip On to work.
We deliver all fronts without holes, for which IKEA provides a drilling template.
This applies to:
Dishwasher fronts
Horizontal wall unit doors
Fronts for under-counter fridges and washing machines
20 x 80 cm and 30 x 80 cm pull-out fronts
If you want your dishwasher front to be in two parts so that it fits better with your drawer fronts, it's no problem. You just need to buy a connecting rail from IKEA. However, we can only guarantee that this rail will fit IKEA dishwashers. For all other appliances, please contact the manufacturer in advance.
To ensure that all components fit together and your kitchen has as uniform an overall appearance as possible, we offer cover shelves, skirting boards and baseboards and also produce them in special sizes on request.
Deck sides are used to cover all visible sides of your kitchen - e.g. the end of a kitchen unit or the outside of a tall cupboard.
You should order tops for all visible sides of your kitchen and then fit them directly to your IKEA cabinets. Before calculating your worktop, note the thickness of the tops, which varies according to design and material.
The cabinets must be placed at least 3cm away from the left or right wall, otherwise the cabinet doors will not open.
The gap between the wall and the cabinet is then covered with a fitting strip. Our standard fitting strips are 15 cm wide and cabinet-high so that they can be adjusted on site. Please follow IKEA's instructions for fitting.
Please note that the material thickness of IKEA side panels differs from our thicknesses.
Neuvermoebelt deck sides are 12 to 20 mm thick. You should take this into account when choosing the length of your worktop so that it is flush with the top sides.
The top sides are usually 62 to 62.5 cm deep so that they are flush with the fronts. We will be happy to discuss all possible options with you.
Skirting boards or baseboards cover the legs of cabinets and can be attached directly to the legs of the carcasses with small clips.' Our skirting boards have a standard size of 8 x 240 cm and have to be cut to size during assembly.
We calculate for you how many standard skirtings you need in total for your kitchen.
Matching skirting boards with veneer, brass, laminate or linoleum surface are available for each design.
All the products listed here are available in standard sizes. They have to be cut to size on site.
However, we can also produce them in the right size on request.
For this purpose, we recommend that you take measurements of the already assembled carcasses to ensure that the parts fit 100%.
Wir bieten Holzschubladen in Multiplex, Räuchereiche und Natureiche an. Die Schubladen lassen sich leicht in das IKEA METOD System einbauen.
Für die Holzschubkästen verwenden wir BLUM EXTRANS.
Wenn Sie sich dafür entscheiden, brauchen Sie keine Ikea-Schienen und -Schubladen.
We also offer metal drawers. If you choose this system, you don't need to buy rails and drawers from Ikea.
HOW CAN I TELL IF I HAVE A FAKTUM OR METHOD KITCHEN?
If you are not sure which IKEA kitchen you have at home, just look at the arrangement of the holes in your cabinets.
FAKTUM units have only one row of holes along the edge.
METOD units have two rows.
Please note that you can no longer buy FAKTUM!
Neuvermoebelt® also offers a new look for your Faktum kitchen. If you want to equip your old kitchen with new fronts, please contact us. We will produce the right fronts for you, made to measure.
We also manufacture cupboard doors. These are made exclusively from MDF with an oak, smoked oak or coloured MDF edge for warping reasons.
All wardrobes must be mounted on the wall.
We do not recommend wall-mounting wardrobes without feet, as they become very heavy and there is a risk of them coming loose from the wall anchorage.
The doors cover the skirting board and end 2 cm above the floor, if carpeted check if this is sufficient to allow the door to open easily. If this is not the case, we will also make the desired dimension.
To avoid problems when fitting drawers in the lower half of the wardrobe, it is important to determine the positions with the carcase planner.
It is also possible to order the side panels down to the floor.
Tip-on doors are only possible for wardrobes with a width of 50 cm.
You can also order top units for the Pax system from us.
Wardrobes with a real wood carcase made of multiplex can also be ordered.
The same applies to the Platsa series.
For selected bathroom furniture in the GODMORGON range, we also offer fronts, tops and cover panels.
To ensure that the fronts remain beautiful for a long time, we recommend that they are only used in bathrooms that are well ventilated or have a window so that steam and moisture can escape.
As an alternative to the GODMORGON range, METOD kitchen cabinets can also be used as bathroom furniture.
This is possible with the following dimensions
Depth of 40 and 60cm
Width of 40/60/80cm
Can be combined up to a total width of 40/60/80/120/180cm
For a quotation we need the exact dimensions and the position of the siphon. The maximum depth of the top drawer is 34 cm. The bottom drawer depends on the distance of the siphon from the floor.
We have a range of beautiful countertop washbasins.
You will also find sideboards made exclusively with the Metod system.
With the dimensions 40 and 60cm depth_40/60/80cm width_40/60/80/120/180/240cm width.
There are 2 versions.
Variant 1 _Smart Collection a collection designed by us with fixed dimensions and constellations. They have a combination price and can be delivered quickly.
Variant 2_ 'A la carte designs' that you configure yourself.